y series motor Model:
Y160M-4-11KW three-phase asynchronous motors rated voltage 380V (can also be customized according to customer demand for a variety of voltage), frequency of 50hz (or 60hz), protection class IP44 (can be customized to IP44, IP54, IP55 according to customer demand ), usually cast iron casing, but also can produce as aluminum motor (price is slightly more expensive than cast iron).
Y160M-4-11KW should use three-phase asynchronous motors Note:
During operation, with a thermometer to measure the temperature rise of the enclosure, generally no more than 75 ℃.
It should ensure that the motor is running good bearing lubrication, general motor is running around 2000H, which should supplement or replace the lubricating means (Closed bearing service life without replacing the grease)
The motor must have adequate protection against the staff closer to the rotating body; when the motor is running, Never touch moving parts.
According to the technical requirements of the motor, the motor limit the number of consecutive start, generally no more than 3 consecutive start idling times, the motor long run to the hot, start after the shutdown can not be more than two times.
The motor during operation, the surface should be kept always clean, air inlet not shoot hinder dust fibers.
Y160M-4-11KW three-phase asynchronous motor specific parameters are as follows:
Y160M-4-11KW three-phase asynchronous motor parameters :( motors are factory produced copper GB)
型 号 | 额定 | 额定 | 转速 | 效率 | 功率 | 堵转转矩 | 堵转电流 | 最大转矩 | |||
功率 | 电流 | 因数 | |||||||||
额定转矩 | 额定电流 | 额定转矩 | |||||||||
kW | A | r/min | % | COSФ | 倍 | 倍 | 倍 | ||||
同步转速 1500r/min 4 级 | |||||||||||
Y250M-4 | 18.5 | 35 | 2935 | 90 | 0.9 | 2.2 | 7.5 | 2.3 |
其他Y系列三相异步电机型号参数:
号 | 功率 (KW) | 额定电流 IN (A) | 额定转速 nN (rpm) | 效率 η (%) | 功率因数 (cos) | 堵转转矩 | 堵转电流 | 最小转矩 | 最大转矩 |
额定转矩 Tst/TN | 额定电流 Lst/TN | 额定转矩 Tmin/TN | 额定转矩 Tmax/Tn | ||||||
同步转速3000转/分rpm | |||||||||
Y80M1-2 | 0.75 | 1.8 | 2830 | 75.0 | 0.84 | 2.2 | 6.5 | 1.5 | 2.3 |
Y80M2-2 | 1.1 | 2.5 | 77.0 | 0.86 | 7.0 | ||||
Y90S-2 | 1.5 | 3.4 | 2840 | 78.0 | 0.85 | ||||
Y90L-2 | 2.2 | 4.7 | 80.5 | 0.86 | 1.4 | ||||
Y100L-2 | 3 | 6.4 | 2870 | 82.0 | 0.87 | ||||
Y112M-2 | 4 | 8.2 | 2890 | 85.5 | |||||
Y132S1-2 | 5.5 | 11 | 2900 | 0.88 | 2.0 | 1.2 | |||
Y132S2-2 | 7.5 | 15 | 86.2 | ||||||
Y160M1-2 | 11 | 22 | 2930 | 87.2 | |||||
Y160M2-2 | 15 | 29 | 88.2 | ||||||
Y160L-2 | 18.5 | 36 | 89.0 | 0.89 | 1.1 | 2.2 | |||
Y180M2 | 22 | 43 | 2940 | ||||||
Y200L1-2 | 30 | 57 | 2950 | 90.0 | |||||
Y200L2-2 | 37 | 70 | 90.5 | ||||||
Y225M-2 | 45 | 84 | 2970 | 91.5 | 1.0 | ||||
Y250M-2 | 55 | 103 | |||||||
Y280S-2 | 75 | 140 | 92.0 | 0.9 | |||||
Y280M-2 | 90 | 167 | 92.5 | ||||||
Y315S-2 | 110 | 200 | 2980 | 1.8 | 6.8 | ||||
Y315M-2 | 132 | 237 | 93.0 | ||||||
Y315L1-2 | 160 | 286 | 93.5 | ||||||
Y315L2-2 | 200 | 356 | 0.8 |
型号 | 功率 (KW) | 额定电流 IN (A) | 额定转速 nN (rpm) | 效率 η (%) | 功率因数 (cos) | 堵转转矩 | 堵转电流 | 最小转矩 | 最大转矩 |
额定转矩 Tst/TN | 额定电流 Lst/TN | 额定转矩 Tmin/TN | 额定转矩 Tmax/Tn | ||||||
同步转速1500转/分rpm | |||||||||
Y80M1-4 | 0.55 | 1.5 | 1390 | 73.0 | 0.76 | 2.4 | 6.0 | 1.7 | 2.3 |
Y80M2-4 | 0.75 | 2.0 | 74.5 | 2.3 | 1.6 | ||||
Y90S-4 | 1.1 | 2.8 | 1400 | 78.0 | 0.78 | 6.5 | |||
Y90L-4 | 1.5 | 3.7 | 79.0 | 0.79 | |||||
Y100L1-4 | 2.2 | 5.0 | 1430 | 81.0 | 0.82 | 2.2 | 7.0 | 1.5 | |
Y100L2-4 | 3 | 6.8 | 82.5 | 0.81 | |||||
Y112M-4 | 4 | 8.8 | 1400 | 84.5 | 0.82 | ||||
Y132S-4 | 5.5 | 12 | 85.5 | 0.84 | 1.4 | ||||
Y132M-4 | 7.5 | 15 | 87.0 | 0.85 | |||||
Y160M-4 | 11 | 23 | 1460 | 88.0 | 0.84 | ||||
Y160L-4 | 15 | 30 | 88.5 | 0.85 | |||||
Y180M-4 | 18.5 | 36 | 1470 | 91.0 | 0.86 | 2.0 | 1.2 | 2.2 | |
Y180L-4 | 22 | 43 | 91.5 | ||||||
Y200L-4 | 30 | 57 | 92.2 | 0.87 | |||||
Y225S-4 | 37 | 70 | 1480 | 91.8 | 1.9 | ||||
Y225M-4 | 45 | 84 | 92.3 | 0.88 | 1.1 | ||||
Y250M-4 | 55 | 103 | 92.6 | 2 | |||||
Y280S-4 | 75 | 140 | 92.7 | 1.9 | 1.0 | ||||
Y280M-4 | 90 | 164 | 93.5 | 0.89 | |||||
Y315S-4 | 110 | 201 | 93.5 | 1.8 | 6.8 | ||||
Y315M-4 | 132 | 241 | 1490 | 94.0 | |||||
Y315L1-4 | 160 | 291 | 94.5 | ||||||
Y315L2-4 | 200 | 354 | 0.9
|